75.07 (Apr 30 2024)

Release Notes

VoC

(IMPROVED)

Improved the update operations of the system update app (FOTA client app) when trying to update via intent.

  • Silent update (update without user confirmation)
  • Update while screen is locked


EmKit

(NEW)

Program Buttons: Added new abilities to map a specific keycode (Direct input) to the buttons on the navigation bar.

More> Map Other Functions to the Navigation Bar Buttons

(IMPROVED)

Applied better UX design for the following EmKit solution apps.


Scanner Settings

(NEW)




Added the following settings in the Option menu.

  • DPM enhance mode: reads DPM (Direct Part Marks) better (Only for 2D scanner).
  • Clear Data: removes the currently entered string from the field and enter the newly decoded data.

More> ScanSettings User Guide - Option

Added the Reduced quiet zone option for Interleaved 2 of 5 symbology to read a barcode with narrow quiet zone.


Operating System

(IMPROVED)

Integrated the battery health information to the EmKit > EmHealthReport instead of the Settings > Battery, for better understanding.




75.06 (Dec 11 2023)

Release Notes

PM75 VoC

(FIXED)

Requested to enhance security when FRP (Factory Reset Protection) is activated.

→ Block provisioning actions in the FRP activated state.

 

EmKit

(IMPROVED)

Scan2Set: Improved Scan2Set to allow use of mobile data during provisioning with a QR code.


Operating System

(IMPROVED)

Updated Iran Standard Time, IRST (Tehran) to UTC+03:30.

Improved the date & time setup to perceive the build year after booting or factory reset.





75.05 (Jul 14 2023) 

Release Notes

PM75 VoC

(NEW)

EmSettings: Requested to remove the screen rotation button on the navigation bar.

→ Added an option to select whether to use or not the manual screen rotation icon on the navigation bar.

EmKit

(NEW)

Program Buttons: Meta option for mapping the Ctrl and Shift key combination behavior easily.

EmSettings: Added a setting to hide or show the navigation bar.

System Information: Added radio generation & antenna information in Radio > WLAN section.

Scan2Set: Added ability to use alias for Wi-Fi certificate when provisioning using QR code.

(IMPROVED)

Program Buttons: New smart remap feature and improved UI helps you remap and control the button functions easier.

Scanner / ScanSettings

(NEW)

Added IP Send function that sends the barcode data to an IP address through TCP/UDP protocol.

Added new PEW actions:

  • Change to upper case: Changes all characters to upper case.
  • Change to lower case: Changes all characters to lower case.
  • Send up to char / string: Sends only the part before a specific character or string.

Added several scanner settings: 

  • Stop auto scan with scan button: exits the auto scan mode by button.
  • TouchScan size: adjusts the size of the TouchScan button on the screen.
  • Always trigger enable: makes the trigger always turned on.
  • Intercharacter delay: delivers delay time between each character of the decoded data.

Added the QR Code symbology's detail options to read a QR code:

  • with no quiet zone (low-contrast background) → No Quiet Zone
  • with out of standard finder pattern → Non square decoding
(IMPROVED)PEW > Send Delay action can be applied between the other actions.

Device Settings

(NEW)

Added new battery health index in Settings > Battery for more accurate battery lifetime estimation.

Added an ability to calculate the battery lifetime indexes by OS itself.

(IMPROVED)

Improved system update (FOTA) to display an error message to check why the update failed.

Network

(NEW)

Added a setting for PNO (Wi-Fi preferred network offload) Scan Interval and frequency culling.

(IMPROVED)

Improved the private mobile network setting to have ability to automatic setting.


Operating System

(NEW)

Added ability to custom boot animation using the enterprise storage.

Added ability to allow applications which use CPU resource a lot through Scan2Stage.

(IMPROVED)

System restricts setup wizard proceeding when a provisioning configuration exists in the enterprise storage to wait for the automatic provisioning.

System restricts not display of the power menu when the side scan button and power button are pressed at about the same time. (To prevent inconvenience caused by mis-pressing.)





75.03 (Jul 08 2022) 

  • SDK: v3.25.01
  • Security Patch: 2022-05-05
Release Notes

Find the VoC related to 75.03 version on the below table.

LocationVoCImprovements
U.S.Requested to operate Send Next action of PEW more flexible about data lengthImproved the action to operate with the length of scanned data automatically when the value you set is longer than the scanned length
Requested to support the scanner wedge function that trims the last digits of the dataAdded Remove back to action to PEW
KoreaRequested the API to enable/disable the Ethernet TetheringAdded API to get the Ethernet Tethering status,
and enable/disable the feature


<New / Improved Functions on PM75 >

Added / Improved Functions

  • [EmLogTool] Expanded available log types (see below list) and improved better user experience design. Refer to EmLogTool Web Guide.
    • Logcat with configurable buffers
    • Kernel message
    • Snapshot
    • Traces
    • QXDM
    • WLAN Driver
    • TCPDump
  • [Scanner] Segmented the result type of Keyboard Event to Keyboard Event (Multiple) and Keyboard Event (Single),
    to ScanSettings to meet more various scanner use case
  • [Display] Added All Rotation setting option. Refer to related article.
    • Location: Settings > Display > All Rotation
    • Default: Disabled (Do not rotation 180 dgree)
  • [Phone] Added private mobile network option for users in private LTE environment. Refer to related article (Log-in required).
    • Location: Settings > mobile networks > Private mobile network
    • Default: OFF (Not use private LTE)
  • [WLAN] Added Detail Settings for 5G preference roaming, 5GHz Roaming Preference setting & RSSI margin
    • Location: Settings > Network & internet > Wi-Fi > Wi-Fi preferences > WLAN Detail Settings





75.02 (Mar 22 2022)

  • SDK: v3.24.02
  • Security Patch: 2022-01-05
Release Notes

Find the VoC related to 75.02 (Mar 22 2022) version on the below table.

LocationVoCImprovements
KoreaRequested to add a function to restrict USB module connectionAdded API to the system
Also supported through Scan2Stage (From v10.1.2 and compatible client app)
Requested to prevent occurring KeyEvent twice after changing key via KCM file

Improved not to occur keyEvent twice when the key is set as fallback behavior

Related article

EuropeRequested to apply keystroke method when transmitting the decoded dataOptimized the Keyboard Event result type to use the keystroke method
U.S.Requested to remove the File Download dialog during provisioning through Scan2SetRemoved the dialog when the file overwrite checking is not required


<New / Improved Functions on PM75 >

Added / Improved Functions

  • (WLAN) Default band of Wi-Fi hotspot has changed to 5GHz band
  • (Enterprise Storage) Added a function to reset the enterprise storage





75.01 (Dec 23 2021)

  • SDK: v3.24.00
  • Security Patch: 2021-11-05
Release Notes

Find the VoC related to 75.01 version on the below table.

LocationVoCImprovements
U.S.

Requested to simplify the QR code provisioning process in Setup Wizard screenProvisioning process will be started once scanning the QR code, without launching Scan2Set manually
Requested to support Enterprise storage

Added /enterprise/usr/ storage which can be used for backup the provisioning data
Related article

Requested a way to identify information that barcode data came fromAdded new intent field, Source of Scanner


<New / Improved Functions on PM30 >

Added / Improved Functions

  • (Phone) Added automatic call answer function while Bluetooth (headset) is connected





  • No labels