97.03 (Aug 12 2024)
Bluetooth
| (NEW) | Supported Bluetooth LE (Low Energy) mode. |
|---|---|
| (IMPROVED) | Improved the values selectable for the HID Delay > Char Delay setting to set more densely.
|
Settings
| (NEW) | Added a Data Form option to determine the data to be saved in USB Disk mode. Go to Admin Menu > Configuration > USB Settings > Data Form. |
|---|
97.02 (Oct 05 2022)
- Bluetooth firmware: v3.6
Find out important change.
PM3 VoC
| (NEW) | Requested to add a feature that controls the iPhone keyboard → Show or Hide the iOS keyboard using '^' button on the PM3+ |
|---|
Wireless
| (IMPROVED) | Improved Bluetooth connection stability |
|---|
97.01 (Aug 23 2022)
- Bluetooth firmware: v3.5
PM3 VoC
| (IMPROVED) | Requested smoother connection with iPhone. → Fixed to be searched PM3 from iPhone smoothly |
|---|---|
| (NEW) | Requested to support HID settings in iOS connection same as PM3. → Added iOS option in Connect OS settings in HID settings. |
Must update both firmware (main & Bluetooth) for best performance
Download each update tool and firmware file on Service Portal.
97.00 (Apr 15 2022)
Newly released PM3 supports enhanced Bluetooth and common connector standard (USB Type C).
Experience smoother data communication with PM3 Bluetooth scanner!
Not Compatible with PM3 device
DO NOT install the firmware of PM3 with USB Type C connector on PM3 with 5-pin connect because they are not compatible.
If you want to use PM3 with USB Type C connector, please contact Point Mobile sales team first.
91.29 (Mar 30 2022)
Find the VoC related to 91.29 (Mar 30 2022) version on the below table.
| Location | VoC | Improvement |
|---|---|---|
| Korea | Requested to do not transmit the non-printable character in HID mode | Added HID Non-Print settings in Admin menu > Bluetooth > HID Settings > HID Non-Print
|
| Requested to add an option for not transmitting the first character in the decoded data | Added Remove Front Character setting (Configurable only via special barcode) | |
| Requested to add Tab+LF terminator | Added Tab + LF terminator |
91.28 (Apr 02 2021)
Refer to the table below to see Fixed bug applied on the new Firmware
Inquiry / Issue | Solution | |
|---|---|---|
| 1 | Garbage data comes addition to barcode data when the length limit setting value is greater than the number of barcodes value | Fixed incoming barcode data to fit the length limit setting value |
| 2 | Add Send Check digits option for EAN8 and EAN13 in the setting menu | Added in the Setting menu
|
