|
PM5
Check the PM5's status indication (LED and beep sequence) when you tried to read the barcode.
Status Indication | Cause | Solution | |||
---|---|---|---|---|---|
Beep | LED | ||||
1 | Twice (Short medium → High) | Red flash | Decoding failed | Aim the barcode correctly When the scanner failed to read the barcode, the beep rings twice (Short medium → High) and LED flashes red. Aim the barcode referring to the below instruction and try again. | |
2 | Three times (3x Short low) | Red | Decoding Success, but Bluetooth is not connected | Connect the PM5 with a host device This indicates the scanner succeeds in reading the barcode but is connected nowhere with Bluetooth. If the scanner is not connected, connect it by Tap-to-Pair or Scan-to-Pair, or Settings.
| |
3 | Once (Short high) | Green flash | Decoding success | Reset PM5 You didn’t get the scan data even though reading the barcode is successful, perform reset the PM5 and try again. Refer to PM5 Reset for more detail. |