Setting up with JSON fileMake a configuration profile (JSON file) by Scan2Stage or PMDM, and apply the configurations through RingControl app. This article does not describe how to apply through RingControl Lite app. |
This method is suitable for you who... - Knows the admin password
- Wants to change a lot of configurations at once
- (Auto update only) Wants to apply the configurations every time the ring scanners are connected.
1) Preparing Configuration JSON fileTo use this method, you must prepare the configuration profile (JSON file) via Scan2Stage or PMDM first. You can download the tools from the Service Portal. - (Using Scan2Stage) Execute the Scan2Stage and go to EmSolution > RingControl.
(Using PMDM) Navigate to Profiles > Add, and then go to RingControl tab. - Raise the revision number (Skip if this is your first JSON file creation) and set up the desired configurations.
- Save JSON file.
2) Update (Manual or Auto)You can apply the configuration using JSON file through auto update or manual update. Auto Update | Manual Update |
---|
Apply the configuration every time the ring scanner is connected. | Apply the configuration immediately & once. |
- Auto update: Apply the configuration every time the ring scanner is connected.
- Manual update: Apply the configuration immediately, once.
Find the detail of auto update in .
If you want to perform manual update, - Launch Ring Control and connect a ring scanner you use.
- Access Advanced settings by tapping the gear icon on the top of the screen.
- Tap Update Ring Scanner settings with JSON file.
- Tap APPLY NOW.
|