고객의 더욱 편리한 PM5 이용을 위해, PM5의 기본 설정값은 계속 최적화되고 있습니다.
이곳에서 PM5의 기본 설정값을 확인하세요.
최신 변경된 사항은 빨간색 글씨로 하이라이트 되어있습니다.
자세한 사항은 아래의 최신 PM5 Release Notes에서 확인할 수 있습니다.
이 기본 설정 값은 92.06 (Feb 07 2022) 버전 기준으로 작성되었습니다.
Setting | Options / Range | Default |
Wedge Mode | ||
Result Type |
| Clipboard (KEYCODE_PASTE) |
Custom Intent | ||
Intent Action | device.scanner.EVENT | |
Intent Category | android.intent.category.DEFAULT | |
Extra Decode String Value (String) | EXTRA_EVENT_DECODE_VALUE | |
Extra Decode Bytes Value (ByteArray) | EXTRA_EVENT_BYTES_VALUE | |
Extra Scanner Source (String) | EXTRA_EVENT_SOURCE | |
Character Set | ||
Charset |
| UTF-8 |
Setting | Options / Range | Default |
Trigger Timeout (sec) | 1 ~ 10 sec | 10 sec |
Sleep Timeout (sec) | 1 ~ 60000 sec | 60 sec |
Transmit Barcode ID |
| Disable |
Prefix | Up to 10 characters | |
Suffix | Up to 10 characters | |
Terminator |
| LF |
Center Window |
| Disable |
Center Window Tolerance | 0 ~ 100 | 30 |
Inverse Mode |
| Inverse Off |
HID Inter Char Delays | 0 ~ 250 ms | 20 ms |
Batch Mode |
| Normal |
Deep Sleep Mode |
| Disable |
Connect Alert |
| Enable |
Trigger Mode |
| Normal |
Poor Quality 1D Codes Reading |
| Disable |
Poor Quality PDF Codes Reading |
| Disable |
Decode Security (Reading Tolerance) |
| Medium |
Aimer |
| Enable |
LED Illumination |
| Enable |
Delay before Decoding (sec) |
| Disable |
Lock Parameter Barcode Scan |
| Disable |
Setting | Options / Range | Default |
BT Class |
| Class 2 |
Bluetooth Disconnection Timeout |
| None |
Setting | Options / Range | Default |
Beep | ||
Enable Beep |
| Enable |
Beep Volume |
| High |
Power Up Beep |
| Enable |
Scan Success Beep |
| Enable |
Scan Fail Beep |
| Disable |
LED | ||
Enable LED |
| Enable |
Scan Success LED |
| Enable |
Scan Fail LED |
| Disable |