ISSUE
Beep sound
How to disable beep sound in scanner
There is no beep sound when the scanner scan a barcode successfully
Beep sound volume is too high/low
Is it possible to change the beep sound?
LED
How to enable/disable the LED notification in scanner
Vibrator
Can I enable vibration when scan succeeded?
How to disable bad scan vibration?
RESOLUTION
You can adjust the scanner notification such as beep, vibrator, LED at one menu.
- Go to Settings > ScanSetting or EmKit > ScanSetting and Tap Notification.
Turn On Scanner
Scanner option menus(ex. notification, symbologies, etc.) are not displayed if the scanner is turned off.
Please turn on the scanner by tapping the Scanner On/Off switch.
2. Adjust scanner notification as below
| Beep | Enable/Disable | Tap switch |
|---|---|---|
| Adjust sound volume | Scroll the level bar | |
| Change beep sound | Tap Good read/Bad read in Beep | |
| LED | Enable/Disable | Tap switch |
| Vibrator | Enable/Disable | Tap switch |
| Change length of vibration(0~3seconds) | Tap Good read/Bad read in Vibrator |
If you want to know how to use other scanner settings, please refer to the following articles.
RELATED ARTICLES
