This article describes the charging scenario of individual or assembled RF300 and PM30.
In most ways of charging, the devices are charged individually. But in some charging methods, the devices will be charged simultaneously or sequentially.
See the following instruction.
APPLIES TO
PM30
RF300
Way of Charging
There are 5 ways to charge the devices in assembled state.
- Connect USB cable to RF300
- From Power adapter
- From PC
- Connect USB cable to PM30 (from Power adapter or PC)
- From Power adapter
- From PC
- Using SSC (Single Slot Cradle)
Charging Scenario
RF300 | RF300 + PM30 (Mounted) | PM30 | ||
---|---|---|---|---|
Connect cable to RF300 | USB-C with power adapter | Charging RF300 | Charging RF300 → PM30 sequentially (After RF300 is fully charged, PM30 starts charging) | - |
USB-C with PC | Charging RF300 slowly | Charging only RF300 slowly | - | |
Connect cable to PM30 | USB-C with power adapter | - | Charging only PM30 | Charging PM30 |
USB-C with PC | - | Charging only PM30 slowly | Charging PM30 slowly | |
Cradle (SSC; Single Slot Cradle) | - | Charging RF300 & PM30 simultaneously | - |
Note
- When a charger is connected to PM30, only PM30 will be charged regardless of whether the RF300 is mounted or not.
- To charge the devices at the same time, use SSC (Single Slot Cradle). The cradle is sold separately.
RELATED ARTICLES