PM3 ScanSetting via Demo Application

You can set up scan settings, for example, prefix & suffix, enable/disable symbologies to PM3.

Because PM3 has no keypad, detail scan setting can be set with PM demo application.

The demo application is available on Windows, android and even iOS. Therefore, you can use the app on your PC or mobile computer.

BEFORE START

APPLIES TO

PM3

Connect device

First, install and execute Demo application on your device.

Then, on PM3, navigate to Menu > Pairing to ready to pair with your device.

Click Search button

Click Scan button to search the nearby Bluetooth devices.

When the Bluetooth devices are listed up, select PM3 with serial number and click Ok.

Connect the PM3 with your windows phone in Settings > Bluetooth

On DemoPMSync application, Click Search Device button

Then, select PM3 by SN and Click OK button

Click Connect to establish the connection

Tap to search the nearby Bluetooth devices

Tap Scan for devices to search new Bluetooth device

Select the PM3 in available devices list.

If a dialog asking pin code show up, type 0000

If you set Connect Mode as 'SPP' on PM3, no need to input the pin code.

Connect your iOS device to the PM3 in Settings > Bluetooth

Run PMSync application and Choose the PM3

Select the protocol

Click Auto BT Connect and select the PM3