ISSUE
- Cannot turn on the RFID reader even though pressed the power button.
APPLIES TO
Point Mobile RFID readers
- RF851, RF300, RF750, RF900
RESOLUTION
If you cannot turn on the reader even though you pressed the power button, check the LED indicator when you try to turn on the device.
Symptom 1. No LED lights | Cause: Not enough battery Solution: Charge the reader If the LED doesn't light, it indicates the battery is too low to turn on the reader. Charge it using the power adapter or charging cradle first. |
Symptom 2. Blinking Green & Red alternatively (Charging LED) | Cause: Battery fault Solution: If the charging LED is blinking green and red when you connect the reader to charger, it indicates the reader could not recognize the battery. To solve this state, follow the steps below. When each step does not work, move on to the next step.
|
Not Resolved?
Refer to similar troubleshooting guides.
Similar Troubleshooting
There is no content with the specified labels