Versions Compared

Old Version 3

changes.mady.by.user Point Mobile Technical Support Team

Saved on

compared with

New Version 4

changes.mady.by.user Point Mobile Technical Support Team

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: RingControl config tool 내용 삭제, Download page 추가

...

Find the 3 ways to changing PM5's configuration and select the most convenient way to your work environment.

Note
titleBEFORE START
  • Ring Control RingControl application is required. Download the app from the Service Portal or Download page, and install it on your host device, first.
  • Admin password is required. If you don't know the password, request to change the configurations to your administrator.

...

UI Tabs
UI Tab
titleSetting up with Ring Control

Setting up with

Ring control

RingControl

Connect the ring scanner you use with the host device, and change the configuration through the Ring Control RingControl app.

This method is suitable for you who...

  • Knows the admin password 
  • Wants to change a few configurations immediately


To use this method,

 

  1. Launch Ring Control and connect a ring scanner you use.
  2. Access Advanced settings by tapping the gear icon on the top of the screen.
  3. Input the admin password.
  4. Tap the desired configuration category
    1. Wedge settings (Not supported in RingControl Lite)
    2. System settings
    3. Bluetooth settings
    4. Notification settings
    5. Symbology settings
Info
titleDefault Configuration

Ring Control RingControl app loads the configuration from the connected ring scanner. 

So the loaded configurations might not be the factory default values.

The JSON file's name and location must be as below. Otherwise, the Ring Control app cannot recognize the file.

  • Filename: RingControl.json
    • File location: RingControl folder in the host device's internal storage.

    2) Update (Manual or Auto)

    You can apply the configuration using JSON file through auto update or manual update.

    UI Tab
    titleSetting up with JSON file (Ring Control Configuration Tool)

    Setting up with JSON file

    (Ring Control Configuration Tool)

    Make a configuration JSON file by Ring Control Configuration ToolScan2Stage, and apply the configurations through Ring Control RingControl app. 

    (This article does not describe how to apply through RingControl Lite app.)

    This method is suitable for you who...

    • Knows the admin password 
    • Wants to change a lot of configurations at once
    • (Auto update only) Wants to apply the configurations every time the ring scanners are connected.


    1) Preparing Configuration JSON file

    To use this method, you must prepare the JSON file via Ring Control Configuration Tool Scan2Stage first. 

    You can download the tool tools from the Service Portal or Download page.

    1. Execute the Ring Control Configuration Tool and set up the desired configurationsScan2Stage and go to EmSolution > RingControl.
    2. Raise the revision number . (Skip if this is your first JSON file creation)
    3. Click Generate JSON button to save the file.
      Image Removed
    4. Make sure the file name is "RingControl.json"
    5. and set up the desired configurations.
    6. Save JSON fileCopy the file to RingControl folder in the host device's internal storage.
      (The folder is automatically made when installing the Ring Control app on the device.)
    Note
    titleFile Name & Location
    Auto UpdateManual Update

    Apply the configuration
    every time the ring scanner is connected.

    		Apply the configuration
    immediately & once.
    • Auto update: Apply the configuration every time the ring scanner is connected.
    • Manual update: Apply the configuration immediately, once.

    Find the detail of auto update in 

    UI Button
    colorblue
    newWindowtrue
    sizesmall
    iconlink
    titlePM5 Configuration Auto Update via Ring Control
    urlhttp://post.solution-pointmobile.co.kr:8040/x/IAHAAg
    .


    If you want to perform manual update,

    1. Launch Ring Control and connect a ring scanner you use.
    2. Access Advanced settings by tapping the gear icon on the top of the screen.
    3. Tap Update Ring Scanner settings with JSON file.
    4. Tap APPLY NOW.

    UI Tab
    titleSetting up with Special Barcodes

    Setting up with Special Barcodes

    Scan the special barcode and change the configuration easily.

    The benefit of this method is that it also can be used while you are using the ring scanner with HID mode.

    This method is suitable for you who...

    • Knows the admin password 
    • Wants to change a few configurations more easily
    • Wants to change configuration while using the ring scanner with HID mode.


    To use this method, 

      

    1. Launch Ring Control app
    2. Tap icon on the top of the screen.
    3. Input the admin password.
    4. Tap the desired configuration.
    5. Explore the options by swiping the screen, and scan the barcode you want.

    ...