Page History
...
APPLIES TO
All Point Mobile Android devices with Scanner
...
How to Set Scanner Notification
ISSUE
Beep sound
How to disable beep sound in the scanner
There is no beep sound when the scanner scan a barcode successfully
Beep sound volume is too high/low
Is it possible to change the beep sound?
LED
How to enable/disable the LED notification in the scanner
Vibrator
Can I enable vibration when scan succeeded?
How to disable bad scan vibration?
RESOLUTION
You can adjust the scanner notification such as beep, vibrator, LED at one menu.
- Go to Settings > ScanSetting or / EmKit > ScanSetting and Tap Notification.
| Note | ||
|---|---|---|
| ||
Scanner option menus(ex. notification, symbologies, etc.) are not displayed if the scanner is turned off. Please turn on the scanner by tapping the Scanner On/Off switch. |
...
2. Adjust scanner notification as below
| Beep | Enable/Disable |
|---|
| Turn on / off the switch. (ON = Enable beep) | |
| Adjust sound volume | Scroll the level bar. |
Change beep sound | Tap Good read/Bad read |
and select sound file. For more detail, refer to
| ||||||||||
| LED | Enable/Disable |
|---|
| Turn on / off the switch. (ON = Enable LED) | |
| Vibrator | Enable/Disable |
|---|
| Turn on / off the switch. (ON = Enable Vibration) | |
| Change length of vibration (0~3seconds) | Tap Good read/Bad read |
| and select the duration time of vibration. |
...
If you want to know how to use other scanner settings, please refer to the following articles.
...
