Versions Compared

Old Version 4

changes.mady.by.user Point Mobile Technical Support Team

Saved on

compared with

New Version 5

changes.mady.by.user Point Mobile Technical Support Team

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Device does not turn on by pressing the power button. 


...

RESOLUTION

First, try holding down POWER button for 12 seconds. This usually restarts the device. Despite trying this, the device still does not turn on, please follow these steps below.


  1. To check if the battery is fully discharged, connect device to AC/DC power source or cradle. If Charge LED indicator flash red or green, it's an indication that the power source is properly applied and device is in charge mode. Charge the battery some while, try to turn on the device by pressing POWER button.

    Note
    titleNOTES

    Use an original charger from the Point Mobile. Other chargers may damage the device. Also, make sure the charger is not wet.


  2. If Charge LED indicator does not flash at all, remove the battery and press RESET button to clear all flash memory. After pressing RESET button, plug power source and check device cloud boot up.

    Image ModifiedImage Modified

  3. Then, insert the battery and go to Settings > Battery to check battery status.