Page History
...
Disconnection occurs when the timeout you set elapses while the ring scanner and app are NOT IN USE.
The scanner and app are considered IN USE in the following situation, and the timer will be reset so that the connection is kept.
- Connecting a ring scanner via Bluetooth
- Performing the F/W update
- Accessing Advanced settings on the app
- Receiving the scan data (reading success)
Ex) Set timeout = 1 hour
How to set up?
Bluetooth Disconnection Timeout is disabled (No automatic disconnection) as a default.
To use this function, you need to set up the setting through Ring Control UI or configuration JSON file.
You can set the timeout value as 1 hour ~ 24 hours (Interval: 1 hour).
...
- Disable (None)
- Enable
- 1 ~ 24 hour(s) (Interval: 1 hour)
...
Find more detail from
UI Button | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
|
via Ring Control UI
- Access Advanced settings > Bluetooth settings.
- Set desired timeout in the Bluetooth Disconnection Timeout.
via Configuration JSON file
- Execute Ring Control Configuration Tool.
- Select Enable and input desired timeout (unit: hour) in the Bluetooth Disconnection Timeout (under Bluetooth settings section).
- Save the JSON file and copy it to the Ring Control folder in the host device.
- Launch the Ring Control without any connection with a ring scanner.
Warning | ||
---|---|---|
| ||
This setting will be applied by the below methods only regardless of the ring scanner auto/manual update using a JSON file.
|
When Disconnected by Timeout
When the ring scanner is disconnected caused by this setting, a notification is displayed as below.
...
Info | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||
|
...