Page History
...
- Execute the RFID Control Configuration Tool on your PC.
- Find the Filter section, and input the setting values.
- Check Enable filter.
- Save the configuration as JSON file, and copy the file to the host device.
- Apply the JSON file via auto or manual update.
Note | ||
---|---|---|
| ||
Must check the Enable filter to apply the filter. |
...
Multiple Filters
From the following versions, you can configure up to two filters.
...
After setting Filter 2, do the same process as when setting up filter 1 only to apply the filter.
When the filter configurations are applied properly, the reader can read the data that meet the Filter 1 or Filter 2.
...
Info | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||
|
...